DP-B Spare

Here is what I have leftover.... Almost enough to complete an Imadoki conversion.

Front oneway and rear spool (rear bearing? where did it go?)

The rear gear box also missing the inner input shaft bearing. where did it go?

But I have the main parts. An Ima doki conversion maybe a good donor.

front type B 10 deg and DPM knuckles.  one of them has scarring on the inside.

front CVDs are good. But there are no wheel bearings. 

Upper arm is using OTA- style turnbuckle.

rear is using dog-bones. I also have these +6mm TN racing axles. good for HPI bodies with the wider rear.

2 sets of hubs. no sus pins. :(

HPI shocks snap on to the mounts which is good.

Full HEX chassis  screw set.

that ugly spur. Its a bit damaged. But the big missing item is the motor mount.

perhaps it could be turned into a mount. for my spares Spare springs.

Spare arms. Steering is from SSG Stage 3 conversion. Maybe it could work in an Imadoki.

front gear case upper tower mount is stripped. would need drilling and a bolt on the rear. no drama.

but it's not too far off.  bumper mounting plate is missing. These are 5mm posts on the front. not 4mm.

What to do? Hmm. Imadoki conversion might get most of what I need, chassis, Motor Mount and newer steering components.

I went to the trouble of working out a possible completion path with Yen prices without discounts.

 

Yokomo Type B Plastic Chassis
Molded Main Chassis	SD-002MC	3500
F&R Suspention Mount (Separate Type)	SD-300M	580
Quick Battery Mount	SD-118R	400
Motor Mount	SD-304M	1980
Steering belcrank (high angle)	D-109	550
Plastic Chassis Sub total		7010
Front Bumper	SD-001	380
Chassis Brace	SD-002B	780
Aluminium Steering Crank post.	D-029	550
Hard Suspention Arm Pin Set	SD-009	720
Aluminum Spur Gear Adaptor	D-024	1200
Rod End Steel Ball	ZC-206	120
Shock cap ball	YS-8B-1	480
transmission case	SD-302	980
Sub total		12220
required bearings
φ10×φ6mm Bearing for Universal	BB-106-2	0
φ14×φ8mm Ball Bearing transmission	BB-1480-2	0
φ10×φ15mm Ball Bearing	BB-1510	0
yokomo full set
Super Precision Ball Bearing Set (23pcs)	SD-BBP	0
Replacement Bearing set (China)	Ebay Link	1400
TOTAL		13620

So I would be looking at around  $130 to complete a Type B
If i used a Full type Basic as a donor it would be about $160 (with wheels and tyres)

Yokomo SSG Imadoki Chassis Conversion set	D-102	18000
Front Bumper	SD-001	380
Chassis Brace	SD-002B	780
Aluminium Steering Crank post.	D-029	550
Hard Suspension Arm Pin Set	SD-009	720
Aluminum Spur Gear Adaptor	D-024	1200
Rod End Steel Ball	ZC-206	120
Shock cap ball	YS-8B-1	480
transmission case replacement	SD-302	980
Sub total		23210
required bearings
φ10×φ6mm Bearing for Universal	BB-106-2	0
φ14×φ8mm Ball Bearing transmission	BB-1480-2	0
φ10×φ15mm Ball Bearing	BB-1510	0
yokomo full set
Super Precision Ball Bearing Set (23pcs)	SD-BBP	0
Replacement Bearing set (China)	Ebay Link	1400
		24610

If I used an Imadoki conversion to complete I'd be up for $240

it's fun to dream.