RE-DIB 275 Test Spec 2.3

 Check out the CS 2.3 style. https://vimeo.com/62488426




 I had a 13T pulley and a tensioner lying around, so what should I do?

Lets go 2.3 CS and see what happens. 40===12 --15===20

It's almost like Yokomo expected this, as the hole is in the right spot. I'm using a 3mm spacer under an RC Square Tensioner mount with RC square red hardware on the 12T free tensioner pulley. belt is still normal size.

I have an 18T for the rear which could potentially give 2.77 but (belt length becomes and issue. )for now, I think this is enough.



Pretty nice. holds opposite lock pretty well.  Still hard to set up a DIB, to vague in the damper response.