Tampilkan postingan dengan label Chassis Accessories. Tampilkan semua postingan
Tampilkan postingan dengan label Chassis Accessories. Tampilkan semua postingan

Minggu, 03 April 2016

FULL TIME Rear Wheel Drive!


RE-Xtreme RC Checkpoint.

It's a good time to take stock of projects and directions.



3 of these will remain in my stable. The DRB-REW is proving an effective machine and is flexible enough to keep me busy trying things ... for a long time but I don't need 4.


RE-Xtreme Spec as always is Typhoon Silver, Samurai Red, Tsunami Blue. Ninja Black (3rd chassis) is a client build.



It took a year or two for the mainstream and myself to accept the gyro and the original FR-D conversions and FXX-D were based more around scale FR layout than ultimate performance, so the uptake of RWD was a bit hindered by trying to be somewhat too scale.  In a way they restricted themselves.

MST was really the driver of the RWD community outside Japan and pushed to new areas and others jumped on board..

Tamiya and HPI are still nowhere to be seen and probably wont even bother as their market is fool proof entry level 50:50 and will never change but that's ok.



Yokomo has been a little late to the RWD party but they have a solid approach. 

As everyone in Japan has a dori-pake, their Drift Package conversion ( basically a set of long wipers, knuckles , Lower Y arm and a gyro) is all you need to convert a DP to an effective RWD machine.

My RF Concept is just as effective in RWD config. I used MST front end and some leftover REW wiper extensions for front end lock.



The DP wipers were so effective, I made sure they were able to be used on my own DRB REW conversions.


An effective RWD is something most can slap together these days. Just like Counter-Steer, you still need those "Right" components to make it work but it doesn't have to be weight shift or rear battery etc they are just options.

In CS, we had to buy a one way bearing, upgraded front drive shafts, knuckles, and many usable CS pulleys and belts ratios to tune to your Circuit. 

So RWD is not really that different in that you need to buy a few things.


Whichever way you go, you can still have fun. I'll be bringing out the GCRC Demo van next time. Rear wheel Drive RF Concept Drift Package with engine sound and loads of extras.

Enjoy your RC.

Jumat, 25 Maret 2016

Bianca & Ms.Bianca


As if this Yokomo S13 + Addiction aero wasn't looking good, sometimes you want to show off a bit more.




underneath, her name is Bianca.

Minggu, 13 Maret 2016

The Prince of Bling


This is RC Royalty. Gold and Purple have long been the royal colours.



 The MST RMX already has a large number of upgrades available but this machine goes a whole lot further. Some might call it RC Jewellery.

RMX... IFS, Reverse High Motor mount with venom and all alloy. Keyence and more. Decoration in the details.

For those unfamiliar with Max Speed Technology products, they have come a long long way in the last few years especially since the FXX-D and now with RMX and RRX. You can really consider them as a quality alternative.

This one takes it to a new level. 

Senin, 07 Maret 2016

DRB-REW Tune


There are always more than one way to achieve a result. 


 DRB-REW... Rear Evolution Weight-shift.



 Larger battery used with a stronger rear spring.



Black machine is using the older style front bulkheads.Wrap up next upper arms accomodatedby the REW Type C Towers and Support. Forward position arms with extensions providing the sweep. 


Silver REW using V2 front setup with Yokomo DIB and DP RWD parts. DP Long wipers providing an incredible range of sweep. Short battery used with a lighter rear spring. 


So do they handle the same? Well they have a very different feel to drive but on track results are remarkably similar.  Strengths and weaknesses to both.


The black machine is a little more rigid thanks to the V2 Hyper drive bridge and the black chassis is .15mm thicker. Rear setup is also quite different and gives a slight active camber traction advantage.


SSG lower plate... Alloy rear arms and geared drive.


CSG lower plate , plastic OD rear arms and Venom belt drive.

The same....not really... I think there are are about 30-40 differences between these two chassis. 


The most noticible is the trailing rear link suspension. Something inherited from a donor chassis.

Quite Effective.. You will notice a much larger contact patch on the rear tyres compared to the SSG chassis setup. Grip is up on this chassis, so I'm finding dialling more power to compensate.

Both cars running 7.5T which is about 40% too much. But I love the ability to blast at will. Never running out of the ability to break traction, even at higher speeds. But you have to control that power with finger restraint... hehe.

Loving the DRB-REW. Quite satisfied with my creation.  

DRB Parts Outlet


Looking for some DRB or DIB parts. Maybe there's something here.
 


 Overdose DRB Chassis Plates + SSG Towers... Modified.


includes some DRb belt guides. Minor marks on the internal plate.  Underside is virtually unmarked.


Front tower modified for 45T front pulley spacing.


Battery markings on inside.


CA edges.

OD plate Set. $250AUD + Shipping.


DRB SSG Type 1 full plate set with towers.   Bottom relatively unmarked.


Internal some battery marks and small marks.

SSG Chassis Plate Set. $75AUD + Shipping.


 DRB SSG Type 1 full plate set with towers.   Bottom unmarked.


Internal side unmarked.

CSG Chassis Plate Set. $75AUD + Shipping.


DRB/DIB CS gears FULL SET.

1 x BD-One Way 40T Assembly New
1 x Full Counter Gear 28T 1.5x New
1 x Full Counter Gear 22T 1.8x New
1 x Full Counter Gear 20T 2.0x Light Use

$100AUD + Shipping


DRB/DIB CS gears polished set.

1 x BD-One Way 40T Assembly de-anodised -Near New
1 x Full Counter Gear 28T 1.5x used.

$50AUD + Shipping


DRB / DIB one way gear sets.

1 x BD-One Way 40T Assembly de-anodised - BLUE Near New
1 x BD-One Way 40T Assembly de-anodised - BLUE USED
1 x BD-One Way 40T Assembly de-anodised - BLACK USED

Silver ... part of set above.


$40AUD + Shipping


Overdose 8-8 KPI Knuckle Set Silver

Upgrade Bearings and Axle Shaft

$35AUD + Shipping.

Overdose 8-8 KPI Knuckle Set Blue

ABEC Bearings and Axle Shaft

$35AUD + Shipping.


Yokomo 7-7 Knuckle Set

$20AUD + Shipping.

ALL ITEMS LISTED ABOVE $450AUD + Shipping.

Jumat, 26 Februari 2016

DRB-REW Test and Tune.


Dialling in the RWD means getting it all 'just' right.



With so much lock on offer up front, you have to be sure all pieces are accurate and secure.


There's a bit of a formula with front end setup. 


Heaps of lock.

No Binding... wheels should roll freely, even at full lock.

Parallel wheels with just a hint of toe out on full angle. 


Wrap up next VX knuckles and Y arms are very effective in this endeavor.

Now the setups are pretty stable.

May the fun continue.

Rabu, 24 Februari 2016

MID WEEK builds REW + R32


It all starts with a bunch of stuff lying around.



And then there's the paint project you should have finished ages ago.


My last DRB started as an interesting machine. 1.3 cs SSG chassis and a unique JDM setup.


The disassembled machine had seen much work with scoffed alloy, and simply dirty base.
This is the risk of used machinery.


My Build started with a black base. and the front end received some Wrap Up Next parts

Kondo Custom
Wrap Up Next 
0150-FD Kondo Custom HD Apper Arm Ver.II 4mm Shaft (red part number used as blue unvailable) 
0101-FD Kondo Custom Y Arm Ver.III 3mm (Blue Part Number) 
0179-FD Kondo Custom GX front Knuckle Ver.II (Black Part Number)
0079-FD Smart Axle Shaft 


New Overdose OD2130 Ball End Set easily clears the knuckles on full extension.
then you need some ball studs etc.


 doesn't take long to build these days. Front end needs bolting up... Ackerman not set.


I was forced to use an old DIB steering setup. And Sanwa SGS-01D is my choice. But MST 2.0 is favored by others.


So the reverse Moon machine is almost ready. A single night paint means it's rough, but thats just how it should be. About a week from now, it will be covered in sticks to match the others.

Tired... Maybe a holiday...